Pre-Trip Inspection 3 Quiz – Brewsterstransport

Created on October 30, 2023

Pre-Trip Inspection 3

1 / 31

What lights will you need to check on the exterior?

A) Left turn, right turn, headlights high and low beam, running, and clearance lights.

B) Hazard, left turn, right turn, running, and headlights high and low beam.

C) Hazard, headlights, running, and clearance lights.

D) Hazard, left turn, right turn, headlights high and low beam, brake, running, and clearance lights.

2 / 31

Exterior lights that need checked are on which side of the vehicle?

A) Front of vehicle, and both sides.

B) Front of vehicle, rear of vehicle.

C) Answer B plus rear of tractor in combination vehicles.

D) Front of vehicle, both sides of vehicle, and rear of vehicle.

3 / 31

Before you leave the inside can you should not check the exterior lights.

A) False.

B) True.

4 / 31

TX Pretrip Fact Sheet

Questions on Test:

Correct answers needed to pass:

Passing Score:

80%

Age to apply:

ADVERTISE HERE! - ADVERTISEMENT

Fanning the brakes down further after the alarm and buzzer come on should result in the parking brake popping out for a single vehicle, and the parking brake and the trailer air supply popping out for a combination vehicle at?

A) 20 PSI

B) 10 PSI

C) 50 PSI

D) 40 PSI

5 / 31

While fanning down the alarm and light indicating low air pressure should come on at?

A) 100 PSI

B) 40 PSI

C) 80 PSI

D) 60 PSI

6 / 31

Next you should fan the brakes down to make sure all air brake safety devices are working, but what should you do before starting to fan the brakes?

A) Nothing, start fanning the brakes.

B) Turn on your ligh.

C) Make sure the vehicle is in neutral.

D) Turn the key on so that the instrument warning lights come on.

7 / 31

Step 1 of the CDL air brake tests makes sure the leak rate of the red and blue line is not unsafe. With the parking brake released and the brake pedal applied the leak rate should be no more than?

A) 2 PSI for a vehicle with no trailer, and 2 PSI for the tractor plus 1 PSI for each trailer in a combination vehicle in one minute.

B) 3 PSI for a vehicle with no trailer, and 3 PSI for a combination vehicle in one minute.

C) 3 PSI for a vehicle with no trailer, and 4 PSI for a combination vehicle in one minute.

D) 2 PSI for a vehicle with no trailer, and 3 PSI for a combination vehicle in one minute.

8 / 31

To test air leakage the air valves should be?

A) Trailer air supply in, parking brake out, trolley released, and no pressure on the brake pedal.

B) Trailer air supply out, parking brake in, trolley released, and pressure on the brake pedal.

C) Trailer air supply in, parking brake in, trolley released, and pressure on brake pedal.

D) Trailer air supply in, parking brake in, trolley applied, and pressure on the brake pedal.

9 / 31

During the CDL air brakes tests the first step is to check for air leakage?

A) Faluse

B) True

10 / 31

The next step is the CDL air brake test. This portion is done with the engine off, but should you have air pressure built up to governor cut of 120-140?

A) Yes.

B) No.

11 / 31

To test the service brake test you will need to have the trailer air supply valve in, parking brake in, and the hand brake released. How do you test the service brake?

A) Pull against the service brake with no movement.

B) Move quickly and apply the service brake to stop the vehicle.

C) Pull against the service brake with a little movement.

D) Move slowly and apply the service brake to stop the vehicle.

12 / 31

Testing the parking brake requires you to?

A) Move the vehicle slowly and then apply the parking brake stopping the vehicle.

B) Pull against the engaged parking brake with some movement.

C) Move the vehicle quickly and then apply the parking brake stopping the vehicle.

D) Pull against the engaged parking brake with no movement.

13 / 31

To test the parking brake you should have the trailer air supply in, trailer hand break released, and the parking brake _____?

A) Released

B) In

C) None of these

D) Out

14 / 31

What items are part of your safety equipment?

A) All of the above.

B) Fire extinguisher.

C) First aid kit.

D) Road flares.

E) Reflective triangles.

15 / 31

What interior lights do you need to check?

A) High beam indicator light.

B) All the above.

C) Instrument panel lights.

D) Left and right turn indicator lights.

E) Hazard indicators lights.

16 / 31

You don't have to make both the air and city horns work to get credit for them.

A) True

B) False

17 / 31

What should the water temperature gauge do when you start the vehicle?

A) Nothing, then rise slowly as the vehicle warms up.

B) None of the above.

C) Rise immediately.

D) Nothing

18 / 31

Which gauge should be between 12-14, and in the green?

A) Air pressure.

B) Voltmeter.

C) Fuel

D) Water temperature.

19 / 31

The air pressure in a commercial vehicle should rise to governor cutout of?

A) 120 PSI.

B) 100 PSI.

C) 160 PSI.

D) 150 PSI.

20 / 31

These are all gauges that will need checked except?

A) Voltmeter.

B) None of these are correct.

C) Air pressure gauge.

D) Oil pressure gauge.

E) Water pressure gauge.

21 / 31

Before you start the vehicle you should check?

A) Parking brake is set.

B) All the above.

C) The vehicle is in neutral.

D) Seat belt is fastened.

22 / 31

The steering wheel should be checked for?

A) No play exceeding 2" or 10 degrees.

B) No play.

C) None of the above.

D) That it turns.

23 / 31

Items inside the cab you must make function in order to get credit for them are?

A) All answers are correct.

B) Blower motors, temperature control, and diverter.

C) Lights.

D) Air and city horns.

E) Windshield wipers.

24 / 31

Check your mirrors from the inside of the cab for?

A) Clean.

B) Mounts.

C) No cracks.

D) Adjusted so that you can see.

25 / 31

The first thing you should check or do when you sit in the driver's seat is?

A) Check the air horn.

B) Turn on your lights.

C) Buckle your seatbelt.

D) Start the vehicle.

26 / 31

Is it best to check the seat and the seatbelts before sitting down?

A) No.

B) Yes.

27 / 31

Handrails should be checked for?

A) All bolts in place

B) Tight and secure

C) Mounted

D) All the above

28 / 31

Steps leading into the vehicle should be?

A) Strong enough to support twice your weight.

B) Properly mounted and not damaged.

C) Properly mounted.

D) Properly mounted, not damaged, and all bolts tight and secure.

29 / 31

The fuel and air tanks are checked for the same items except?

A) Mounting brackets and bolts.

B) The cap.

C) No leaks.

D) Hoses.

30 / 31

At the side of the cab you should not check.

A) Fuel and air tanks.

B) Lights and reflectors.

C) Steps into the vehicle.

D) Mirrors.

E) None of these

31 / 31

After the engine compartment it is best to move to the driver's side of vehicle, and then head into the cab.

A) True.

B) False.

Your score is

The average score is 0%

Company

Support

Social Media

Download

Brewsters
Transport