0%
0 votes, 0 avg
0
Created on

Combination Vehicles 2

1 / 20

What gear should the tractor engine be in after you uncouple the trailer and are inspecting the trailer supports?

2 / 20

What is a tractor jackknife?

3 / 20

To unlock the fifth wheel, pull the release handle to the _______ position.

4 / 20

You should use chocks when parking a trailer without spring brakes because

5 / 20

An antilock braking system (ABS) is useful

6 / 20

Where should the tractor be when you inspect the landing gear after uncoupling the trailer?

7 / 20

To prevent rollover, cargo should be

8 / 20

Why should you be sure that the fifth wheel plate is greased as required?

9 / 20

The driver crosses the airlines when hooking up to an old trailer. What will happen?

10 / 20

You have coupled with a semi-trailer. In what position should you put the front trailer supports before driving away?

11 / 20

You are coupling a tractor and semi-trailer and have connected the air lines. Before backing under the trailer, you should:

12 / 20

If the service airline comes apart while you are driving a combination vehicle, but the emergency line stays together, what will happen right away?

13 / 20

The air leakage rate for a combination vehicle (engine off, brakes off) should be no more than ____ PSI per minute.

14 / 20

After you supply air to the trailer, make sure the airlines are not crossed and the trailer brakes are working. This is done by:

15 / 20

To stop a trailer skid, you should

16 / 20

Trucks roll over more easily when fully loaded and are

17 / 20

When coupling a tractor-semitrailer, to test the trailer air brakes, you should place the tractor protection valve control in what position?

18 / 20

If your vehicle is equipped with dummy couplers, why should you connect the glad hands to them?

19 / 20

Describe what the trailer air supply control does.

20 / 20

he best way to tell if your trailer has started to skid is to

Your score is

The average score is 0%

0%