Combination Vehicles 2
1 / 20
What gear should the tractor engine be in after you uncouple the trailer and are inspecting the trailer supports?
2 / 20
What is a tractor jackknife?
3 / 20
To unlock the fifth wheel, pull the release handle to the _______ position.
4 / 20
You should use chocks when parking a trailer without spring brakes because
5 / 20
An antilock braking system (ABS) is useful
6 / 20
Where should the tractor be when you inspect the landing gear after uncoupling the trailer?
7 / 20
To prevent rollover, cargo should be
8 / 20
Why should you be sure that the fifth wheel plate is greased as required?
9 / 20
The driver crosses the airlines when hooking up to an old trailer. What will happen?
10 / 20
You have coupled with a semi-trailer. In what position should you put the front trailer supports before driving away?
11 / 20
You are coupling a tractor and semi-trailer and have connected the air lines. Before backing under the trailer, you should:
12 / 20
If the service airline comes apart while you are driving a combination vehicle, but the emergency line stays together, what will happen right away?
13 / 20
The air leakage rate for a combination vehicle (engine off, brakes off) should be no more than ____ PSI per minute.
14 / 20
After you supply air to the trailer, make sure the airlines are not crossed and the trailer brakes are working. This is done by:
15 / 20
To stop a trailer skid, you should
16 / 20
Trucks roll over more easily when fully loaded and are
17 / 20
When coupling a tractor-semitrailer, to test the trailer air brakes, you should place the tractor protection valve control in what position?
18 / 20
If your vehicle is equipped with dummy couplers, why should you connect the glad hands to them?
19 / 20
Describe what the trailer air supply control does.
20 / 20
he best way to tell if your trailer has started to skid is to
Your score is
The average score is 0%
Restart quiz